This DVD has 5 hours of information showing you every little detail and trick on how to build your own engine. It starts with the basics that so many others skip over. The most detailed DVD ever produced on how to build pretty much any engine, from bone stock to mild performance.
Step-by-step workbench book and DVD combination shows you how to build a street or racing small-block Chevy. Includes more than 650 photos and easy-to-read text that explains every procedure a professional builder uses to assemble an engine from crankshaft to carburetor. The DVD includes over two hours of coverage showing all the procedures that the book describes.
This double-sided DVD contains approximately 3-1/2 hours of highly detailed, yet easy to understand information on how to choose the right parts for your engine before it gets built. You'll be taken through many types of cranks, rods, pistons, rings, bearings, harmonic balancers, flywheels, balancing, and everything else you can imagine that involves the internal rotating assembly.
The ultimate video on how to build any kind of performance engine, including numerous types of big cubic inch strokers! Almost 13 hourse of immense, highly detailed information! you'll see exactly what to do, and how to do it, for building your own high performance street or strip engine in your own garage, including how to clearance it for building a monster stroker!
This DVD has almost 5 hours of highly detailed information! Takes you step-by-step through the entire valve train, including many different types of cams, lifters, springs, pushrods, various cast iron and aluminum heads and much, much more. You'll be shown how to read a cam card and how to degree a cam. Aluminum heads vs. cast iron heads, what you can and can't run on the street, old wives tales and myths put to rest once and for all and MUCH, MUCH more!
Two hours of everything you ever wanted to know about Holley carburetors! Virtual tours, exploded views, step-by-step under the hood installation including transmission kickdowns, advanced tuning, and trouble shooting. It is interactive, so you can easily find the chapters you need.
Almost 3-1/2 hours of highly detailed, yet easy to understand information covering numerous brands and types of carbs including Holley, Edelbrock, Demon, and Weber (to name a few).
This double-sided DVD takes you through everything you ever wanted to know (and then some) about nitrous, how it works and how to build your engine and set it up so it will RELIABLY handle this great substance (both on the street and at the track). You'll be taken through several brands and numerous types of systems for both carbureted and EFI engines, from little 20 HP "cheater" systems to giant 600+ HP dual stage fogger systems. You'll also learn about electronics, ignition systems, fuel system upgrades, tips on tuning and jetting, and much MUCH more!
This DVD, "The Proper Procedure to Install & Degree a Camshaft", takes you through the various stages of installation and degreeing and completely explains each step. 35 minutes.
This DVD contains almost 3 hours of highly detailed information. What are they? How do they work? Which type and size do you need for your engine? What do you need to do to an engine to be compatible with a supercharger? What kind of carburetors can you run? What about fuel injection? Old myths and wives tales about the reliability and street ability of supercharged engines are finally put to rest! Covering numerous types of blowers (both Roots type and centrifugal types), and several types of engines, with lots of great tips!
