|
Standard Abrasives Block Prep Kit
Prepping a block properly will ensure longer engine life and better performance. These kits restore the original finish to the block and removes casting imperfections. These 50 piece kits include: (6) quick change 2" sanding discs, (8) 2" quick change surface conditioning discs, (4) 1" x 1" flap wheels, (3) cross buffs, (22) cartridge rolls, (1) 2" holder pad for quick change disc, (1) 1/4" mandrel for holder pad, (1) 1/4"-20 x 4" mandrel for cross buffs or flap wheels, (1) 1/4" 20 x 2-3/4" mandrel for cartridge rolls and (3) set screws for combination mandrels.
Part Type: Block Prep Kit
Application: Universal
Cartridge Rolls Included: (6) 1/2" x 1-1/2" x 1/8" 60 Grit: STA709187
(6) 3/4" x 1" x 1/8" 80 Grit: STA713656
(5) 3/4" x 1-1/2" x 1/8" 40 Grit: STA714979
(5) 3/4" x 1-1/2" x 1/8" 80 Grit: STA713444
Surface Conditioning Discs Included: (4) 2" Medium Grit: STA840332
(4) 2" Very Fine Grit: STA840333
Sanding Discs Included: (3) 2" 100 Grit: STA522407
(3) 2" 150 Grit: STA522409
Holder Pad/Mandrel Included: (1) 2" Pad w/TA4 (1/4") Mandrel: STA541057
Flat Wheels Included: (2) 1" x 1, 1/4"-20, 120 Grit: STA621408
Cross Buffs Included: (3) 1" Very Find HP: STA725008
Mandrels Included: (1) Cross Buff/Flap Wheel Mandrel (w/set screws): STA269201
(1) CM-9 1/8" x 3/4" x 2-1/2": STA710190
Shank Size: .250" (6.35mm)
Case Included: No
Manufacturer: Power Products
Manufacturer's Part Number: 260003
Weight: 2.0 lbs.
Quantity: Sold as Kit
|
