|
Howards Cams Hydraulic Flat Tappet Camshaft
All Howards cams use the highest-grade quality cores available. Computer designed with knowledge of over 65 years of peformance and racing camshaft manucacturing. Howards cams are manufactured on dedicated high precision cam grinding machines. Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. Packaged and shipped in a unique hard, high impact plastic reusable case. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.
Manufactured on Dedicated High Precission Machines
Held to Strick Tolerances
High grade quality cores
Rockwell Tested & Parkerized Ensuring the Highest Quality
Hard protective packaging
Part Type: Camshaft
Application: Chrysler Small Block LA V8 273-340-360 '64-'03, 318 '67-'91
Ignition Firing Order: OE (1-8-4-3-6-5-7-2)
Cam Style: Hydraulic Flat Tappet
Basic RPM Range: 1800-5800
Manufacturers Description: Good low & mid-range horsepower. Needs 4 barrel & headers.
Intake Duration @ .050": 220
Exhaust Duration @ .050": 220
Advertised Intake Duration (@ .006"): 267
Advertised Exhaust Duration (@ .006"): 267
Intake Valve Lift with OE Rocker Ratio (1.50): .506"
Exhaust Valve Lift with OE Rocker Ratio (1.50): .506"
Intake Lobe Lift: .337"
Exhaust Lobe Lift: .337"
Intake Valve Lift with 1.55 Rocker Ratio: .523"
Intake Valve Lift with 1.60 Rocker Ratio: .540"
Intake Valve Lift with 1.65 Rocker Ratio: .557"
Exhaust Valve Lift with 1.55 Rocker Ratio: .523"
Exhaust Valve Lift with 1.60 Rocker Ratio: .540"
Exhaust Valve Lift with 1.65 Rocker Ratio: .557"
Lobe Separation Angle: 108 Degrees
Intake Centerline: 104 Degrees
Small Base Circle: No
Cam Gear Attachment: Single-Bolt
Valve Adjustment: Zero Lash Plus 1/2 Turn
Manufacturer: Howards Cams & Racing Components
Manufacturer's Part Number: 711451-08
Weight: 10.0 lbs.
Warranty: Race Application, No warranty expressed or implied
Quantity: Sold as Each
Note: Oil with ZDDP or ZDDP Additive Required
Note: Stock (O.E.) valve springs cannot be used.
Note: Lobes designed to take maximum advantage of .904" lifter dia.
|
