Howards Cams American Muscle Mechanical Flat Tappet Camshaft & Lifter Set
Near duplicates of some of the most iconic original equipment camshaft grinds from the '60's to the early '70's. Howards Cams took these fantastic grinds and made slight changes to the ramp speeds and minor duation changes to give you better reliability and horsepower. You still get the same throttle response and of course the original style exhaust rumble. Great cams for restoration projects and perfect for the street machines.
Note: Always use Camshaft Break-In Lube with all new flat tappet cams.
Manufactured on Dedicated High Precision Machines
Held to Strict Tolerances
High grade quality cores
Rockwell Tested Ensuring the Highest Quality
Part Type: Camshaft & Lifters Set
Application: Ford 351C/M/400 1970-1983
Ignition Firing Order: OE (1-3-7-2-6-5-4-8)
Cam Style: Hydraulic Flat Tappet
Basic RPM Range: 1600-5400
Manufacturers Description: Street Force 2, Good idle, Strong low & mid-range torque & power.
Intake Duration @ .050": 215
Exhaust Duration @ .050": 225
Advertised Intake Duration (@ .006"): 269
Advertised Exhaust Duration (@ .006"): 279
Intake Valve Lift with OE Rocker Ratio (1.73): .513"
Exhaust Valve Lift with OE Rocker Ratio (1.73): .536"
Intake Lobe Lift: .296"
Exhaust Lobe Lift: .309"
Intake Valve Lift with 1.70 Rocker Ratio: .504"
Intake Valve Lift with 1.75 Rocker Ratio: .519"
Intake Valve Lift with 1.80 Rocker Ratio: .534"
Exhaust Valve Lift with 1.70 Rocker Ratio: .527"
Exhaust Valve Lift with 1.75 Rocker Ratio: .542"
Exhaust Valve Lift with 1.80 Rocker Ratio: .558"
Lobe Separation Angle: 112 Degrees
Intake Centerline: 108 Degrees
Lifters Included: Yes, 91211 Hydraulic Flat Tappet
Small Base Circle
