|
Howards Cams Hydraulic Flat Tappet Camshaft
All Howards Cams camshafts use the highest-grade quality cores available. Computer designed with knowledge of over 65 years of performance and racing camshaft manufacturing. Howards Cams camshafts are manufactured on dedicated high precision cam grinding machines. Rockwell checked and Parkerized to ensure the highest quality control standards available anywhere. Packaged and shipped in a unique hard, high impact plastic reusable case. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.
Manufactured on Dedicated High Precision Machines
Held to Strict Tolerances
High grade quality cores
Rockwell Tested & Parkerized Ensuring the Highest Quality
Hard protective packaging
Part Type: Camshaft
Application: Chrysler Small Block LA V8 273-340-360 '64-'03, 318 '67-'91
Ignition Firing Order: OE (1-8-4-3-6-5-7-2)
Cam Style: Hydraulic Flat Tappet
Basic RPM Range: 1400-4800
Manufacturers Description: Smooth idle, very strong torque. Best in 273-318.
Intake Duration @ .050": 208
Exhaust Duration @ .050": 214
Advertised Intake Duration (@ .006"): 255
Advertised Exhaust Duration (@ .006"): 261
Intake Valve Lift with OE Rocker Ratio (1.50): .479"
Exhaust Valve Lift with OE Rocker Ratio (1.50): .494"
Intake Lobe Lift: .319"
Exhaust Lobe Lift: .329"
Intake Valve Lift with 1.55 Rocker Ratio: .494"
Intake Valve Lift with 1.60 Rocker Ratio: .511"
Intake Valve Lift with 1.65 Rocker Ratio: .526"
Exhaust Valve Lift with 1.55 Rocker Ratio: .510"
Exhaust Valve Lift with 1.60 Rocker Ratio: .526"
Exhaust Valve Lift with 1.65 Rocker Ratio: .543"
Lobe Separation Angle: 110 Degrees
Intake Centerline: 106 Degrees
Lifters Included: No
Small Base Circle: No
Cam Gear Attachment: Single-Bolt
Valve Adjustment: Zero Lash Plus 1/2 Turn
Manufacturer: Howards Cams & Racing Components
Manufacturer's Part Number: CL711381-10
Weight: 10.0 lbs.
Warranty: Race Application, No warranty expressed or implied
Quantity: Sold as Each
Note: Oil with ZDDP or ZDDP Additive Required
Note: Stock (O.E.) valve springs cannot be used.
Note: Lobes designed to take maximum advantage of .904" lifter dia.
|
