Painless TBI Harness
This harness is designed for 1990-1992 5.0L & 5.7L Tuned Port Injected (TPI) engines using MAP speed density system. These engines were factory equipped in Chevrolet Camaro and Corvettes and were mated to either a 200-4R or 700R4 transmission. Harnesses do not include all of the original connections for the original emissions but are available separately.
This harness also requires the following mating parts: ECM #1227730, #16198262, or #88999196. The EPROM broadcast code must match tire diameter, gear ratio, engine size, and transmission
Note: This harness is stand alone and is not intended to replace the OEM engine wiring. Stand alone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle.
Harness Length: 4ft. Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based: 1990 Camaro
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires
Connections Included:
All connections for fuel injection operation: ECM, MAP, O2, TPS, OPS, IAC, IAT, CTS, Knock, Injectors, Distributor, OBD1 w/ SES light, VSS and TCC solenoid.
Includes Connections for the Following Components:
- AC Power
- Brake Switch
- Data Link Connector
- Distributor
- ECM
- EGR Valve
- Engine Coolant Temperature
- Fuel Pump
- Fuel Pump Relay
- Fused System Power
- Grounds
- Idle Air Control
- Ignition Switch Signal (Fused)
- Ignition Timing Settings
- Injectors
- Knock Sensor
- Malfunction Indicator Lamp
- Manifold Air Temperature
- MAP Sensor
- O2 Sensor
- Oil Pressure
- Park /Neutral Indicator Switch
- Starter
- Throttle Position Sensor
- Torque Converter Clutch
- VATS
- VSS |