Painless TBI Harness
This harness is designed for 1985-1989 5.0L & 5.7L V8 tuned port injected (TPI) engines using the Mass Air Flow system (MAF). These engines were factory equipped in Chevrolet Camaro and Corvettes and were mated to either a 200-4R or 700R4 transmission. Harnesses do not include all of the original connections for the original emissions, but are available separately.
This harness also requires the following mating parts: ECM #1227165 or #88999194. 1985-1988 engines will require the use of prom #16082183, #16068654, or #1228109. 1989 engines will require prom #16133467 or #16150500.
Note: This harness is stand alone and is not intended to replace the OEM engine wiring. Stand alone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle.
Harness Length: 4ft. Between Engine and ECM
Fuse Type: Blade
Firewall Passthrough: Grommet
Color Code Based: 1988 Chevrolet Camaro
Circuit Designations: Printed Wire Tags on all Connectors and Open Ended Wires
Connections Included:
ECM, MAF, O2, TPS, ESC, IAC, IAT, CTS, Knock, Injectors, Distributor, OBD1 w/ SES light, VSS and TCC solenoid.
Includes Connections for the Following Components:
- AC Power
- Brake Switch
- Cold Start Injector
- Cold Start Switch
- Data Link Connector
- Distributor
- ECM
- EGR Valve
- Electronic Spark Control Module
- Engine Coolant Temperature
- Fuel Relay Ground
- Fuel Pump
- Fuel Pump Relay
- Fused System Power
- Grounds
- Idle Air Control
- Ignition Switch Signal (Fused)
- Ignition Timing Settings
- Injectors
- Knock Sensor
- Malfunction Indicator Lamp
- Manifold Air Temperature
- Mass Airflow Burn off Relay
- Mass Airflow Power Relay
- Mass Airflow Sensor
- O2 Sensor
- Oil Pressure
- Park /Neutral Indicator Switch
- Starter
- Throttle Position Sensor
- Torque Converter Clutch
- VATS
- VSS |