Howards Cams Hydraulic Roller Cam
All Howards™ cams are ground at Howards Cams™, not re-boxed like some cam companies. All Howards™ cams use the highest-grade race quality cores available. Howards™ cams are manufactured on dedicated high precision cam grinding machines. Most Howards™ cams are packaged and shipped in our unique, hard, high impact plastic reusable cases. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.
Manufactured on Dedicated High Precision Machines
Held to Strict Tolerances
High grade quality cores
Rockwell Tested Ensuring the Highest Quality
Part Type: Camshaft
Application: Ford Small Block 221-302 1963-1995, 351W 1969-1996
Ignition Firing Order: OE (1-3-7-2-6-5-4-8)
Cam Style: Retro-Fit Hydraulic Roller
Basic RPM Range: 1000-4800
Manufacturers Description: Small Base Circle, Fair idle, good low & mid-range performance increase.
Intake Duration @ .050": 213
Exhaust Duration @ .050": 219
Advertised Intake Duration (@ .006"): 266
Advertised Exhaust Duration (@ .006"): 272
Intake Valve Lift with OE Rocker Ratio (1.60): .517"
Exhaust Valve Lift with OE Rocker Ratio (1.60): .517”
Intake Lobe Lift: .323"
Exhaust Lobe Lift: .323"
Intake Valve Lift with 1.65 Rocker Ratio: .533"
Intake Valve Lift with 1.70 Rocker Ratio: .549"
Intake Valve Lift with 1.72 Rocker Ratio: .556"
Exhaust Valve Lift with 1.65 Rocker Ratio: .533"
Exhaust Valve Lift with 1.70 Rocker Ratio: .549"
Exhaust Valve Lift with 1.72 Rocker Ratio: .556"
Lobe Separation Angle: 110 Degrees
Intake Centerline: 106 Degrees
Lifters Included: No
Small Base Circle: Yes
Cam Gear Attachment: Single-Bolt
Valve Adjustment: Zero Lash Plus ˝ Turn
Manufacturer: Howards Cams & Racing Components
Manufacturer's Part Number: 220235-10S
Weight: 10.0 lbs.
Warranty: Race Application, No warranty expressed or implied
Quantity: Sold as Each
Note: Stock (O.E) valve springs cannot be used. |