Howards Retro-Fit Hydraulic Roller Camshaft & Lifter Set
All Howards Cams camshafts are ground at Howards Cams, not re-boxed like some cam companies. All Howards Cams camshafts use the highest-grade race quality cores available. They are manufactured on dedicated high precision cam grinding machines. Most Howards Cams camshafts are packaged and shipped in our unique, hard, high impact plastic reusable cases. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.
Manufactured on Dedicated High Precision Machines
Held to Strict Tolerances
High grade quality cores
Rockwell Tested Ensuring the Highest Quality
Hard protective packaging
Part Type: Camshaft & Lifter Set
Application: Ford SB 5.0L/302 H.O. 1985-2002, 351W 1969-1996
Ignition Firing Order: OE (1-3-7-2-6-5-4-8)
Cam Style: Hydraulic Roller
Basic RPM Range: 1800-6000
Manufacturers Description: Performance Street, best used with aftermarket heads. 2500+ stall, better intake/exhaust.
Intake Duration @ .050": 219
Exhaust Duration @ .050": 225
Advertised Intake Duration (@ .006"): 272
Advertised Exhaust Duration (@ .006"): 278
Intake Valve Lift with OE Rocker Ratio (1.60): .544"
Exhaust Valve Lift with OE Rocker Ratio (1.60): .533”
Intake Lobe Lift: .340"
Exhaust Lobe Lift: .333"
Intake Valve Lift with 1.65 Rocker Ratio: .561"
Intake Valve Lift with 1.70 Rocker Ratio: .578"
Intake Valve Lift with 1.72 Rocker Ratio: .585"
Exhaust Valve Lift with 1.65 Rocker Ratio: .550"
Exhaust Valve Lift with 1.70 Rocker Ratio: .566"
Exhaust Valve Lift with 1.72 Rocker Ratio: .573"
Lobe Separation Angle: 110 Degrees
Intake Centerline: 106 Degrees
Lifters Included: Yes, 91213, OE Style Hydraulic Roller
Small Base Circle: No
Cam Gear Attachment: Single-Bolt
Valve Adjustment: Zero Lash Plus ½ Turn
Manufacturer: Howards Cams & Racing Components
Manufacturer's Part Number: CL222725-10E
Weight: 10.0 lbs.
Warranty: Race Application, No warranty expressed or implied
Quantity: Sold as Each
Note: Stock (O.E) valve springs cannot be used. |