Howards Cams Hydraulic Flat Tappet Camshaft
All Howards™ cams are ground at Howards Cams™, not re-boxed like some cam companies. All Howards™ cams use the highest-grade race quality cores available. Howards™ cams are manufactured on dedicated high precision cam grinding machines. Most Howards™ cams are packaged and shipped in our unique, hard, high impact plastic reusable cases. This ensures that the high quality camshaft that went into the case comes out in the same condition, when delivered, as when it was packed.
Part Type: Camshaft
Application: Ford Small Block 221-302 1963-1995 (Except 302 H.O.)
Ignition Firing Order: OE (1-5-4-2-6-3-7-8)
Cam Style: Hydraulic Flat Tappet Camshaft
Basic RPM Range: 600-4800
Manufacturers Description: Smooth idle, strong low end, high vacuum, good fuel economy.
Intake Duration @ .050": 201
Exhaust Duration @ .050": 207
Advertised Intake Duration (@ .050"): 255
Advertised Exhaust Duration (@ .050"): 261
Intake Valve Lift with OE Rocker Ratio (1.60): .437"
Exhaust Valve Lift with OE Rocker Ratio (1.60): .448"
Intake Lobe Lift: .273"
Exhaust Lobe Lift: .280"
Intake Valve Lift with 1.65 Rocker Ratio: .451"
Intake Valve Lift with 1.70 Rocker Ratio: .464"
Intake Valve Lift with 1.72 Rocker Ratio: .470”
Exhaust Valve Lift with 1.65 Rocker Ratio: .462"
Exhaust Valve Lift with 1.70 Rocker Ratio: .476"
Exhaust Valve Lift with 1.72 Rocker Ratio: .482 ”
Lobe Separation Angle: 114 Degrees
Intake Centerline: 110 Degrees
Small Base Circle: No
Lifters Included: No
Cam Gear Attachment: Single-Bolt
Valve Adjustment: Zero Lash Plus ˝ Turn
Manufacturer: Howards Cams & Racing Components
Manufacturer's Part Number: 212001-14
Weight: 14.0 lbs.
Warranty: Race Application, No warranty expressed or implied
Quantity: Sold as Each
|