|
FiTech Fuel Injection Go EFI 2 x 4 625 HP Self-Tuning System
Dual Quad! EFI! Matte Black Finish! Nothing says muscle like 2 big 4bbl's on a V8. FiTech EFI has made it simple with their Go EFI 2 x 4 625 HP self-tuning system. This kit is a bolt on for the most popular manifolds including the Edelbrock line of dual quad manifolds WITHOUT any adapters! They fit and look like they belong there because they were designed to fit from the start. The normally aspirated kits are good through 625 HP but the GO EFI 2 x 4 POWER ADDER kit can handle you guys with the bigger cubes and Roots Superchargers. One throttle body handles all of the brains while the second holds 4 additional injectors, and the IAC motor for idle Stability. These can also be used in cross ram and tunnel ram configurations. No boost with these Please!
Bolt on 2 of these tough looking throttle bodies and drive your car as the system dials itself into the perfect calibration for all of your driving and weather conditions. If you decide you want to tune for more power or economy, the FiTech Touch Screen controller allows quick and easy on the fly adjustments at your fingertips!
- 8 Precision Flow matched injectors capable of flowing 625 HP of fuel
- 2 Matte Black High Flow throttle bodies with mounting for Edelbrock or Holley style manifold. Includes stainless steel polished linkages
- Wire harness for dual quad installation
- 8GB data logging
- 1 Electric Fan control
- Initial setup is quick and easy. Simple touch screen selections get you up and running in minutes. Self-tuning** after startup the ECU
immediately takes over and provides your vehicle with an optimum tune!
- Basic install can be done with just 4 wires and 2 sensors
- Uses the latest Bosch 4.2 wide band O2 sensor while all other sensors are easily replaceable GM style parts
- The ECU is mounted on the throttle body so there is NO external boxes or harnesses to clutter up your engine compartment or
under dash.
This saves you a huge amount of time and keeps things simple and neat
- Throttle bodies have a completely universal base to fit any 4bbl manifold
- All Go-EFI's feature Voltage Control fuel pump control. This feature reduces the voltage to the pump under low load
conditions such as idle and cruise thus reducing noise and heat. This will extend the life of your pump and keep the fuel in
the tank cooler and your ears from ringing!
- Go-EFI Systems feature Wet flow technology and have a unique Swirl Spray Annular discharge design that assures
COMPLETE ATOMIZATION!
- Ignition timing can be controlled and adjusted on the fly from your touch screen controller
- Air Fuel ratios can be optimized on the fly as you drive! Try THAT with your carb!
- Will work with CDI box but not required to control timing
- Built-in fuel pressure regulator. No extra regulator to mount on your fire wall.
- Manufactured with OE engineering. Our ECU's are used Globally and pass Euro 5 emission standards in new vehicles.
Part Type: Fuel Injection System
Application: Universal Dual 4bbl
Horsepower Rating: 625 HP, Naturally Aspirated, Supercharged
Self-Tuning: Yes
Injection Style: Throttle Body
Metering Style: Speed Density
Throttle Body Included: Yes, 2 Die Cast
Throttle Body Mounting Flange: 4bbl Square Bore
Throttle Body Material: Cast Aluminum
Throttle Body Finish: Tumble Polished
Injectors Included: Yes, 8 (4 per throttle body)
Injector Size:
Venturi Quantity: 8, Annular Discharge Design (4 per throttle body)
Intake Manifold Included: No
Fuel Rails Included: Internal
Fuel Inlet Ports: 3 per throttle body
Fuel Inlet Fitting: (2) -6AN
Calibration Module Included: Yes, Handheld w/ Color Touch Screen & Windshield Mount
ECM Included: Yes
Wiring Harness Included: Yes
Oxygen Sensor Included: Yes, Wide Band
O2 Sensor Bung Kit Included: Yes, Clamp-On or Weld-On
Fuel Pump Included: No
Fuel Pressure Regulator Included: Internal
MAP Sensor Included: Yes, Internal
Intake Air Temperature Sensor Included: Yes
Throttle Position Sensor Included: Yes
Idle Air Control Included: Yes
Coolant Temperature Sensor: Yes
Distributor Included: No
Timing Control: No
Voltage Control for Fuel Pump: Yes
Fan Control Included: Yes, 1
Data Logging: Yes
Gasket Kit Included: Yes
Manufacturer: FiTech Fuel Injection
Manufacturer's Part Number: 30061
Weight: 20 lbs.
Warranty: LIMITED WARRANTY- a.) What is Covered- This warranty is limited to repair or replacement (at their option) of any FiTech part that fails because of a defect in workmanship or materials. Implied warranty: Any warranties implied by law are limited to the duration of this warranty, (except in those states where prohibited by law). b.) How Long it is Covered- All FiTech products are warranted for a period of one year from date of original retail purchase with an original receipt showing proof of purchase. c.) Who They Cover- All FiTech warranties apply to the original purchasing consumer. d.) What They Do Not Cover- Failure of a product due to misapplication, improper installation or maintenance, misuse, abuse, unauthorized repairs, accidents, or modifications to the original design. Certain components of the EFI systems are limited to a 90 day warranty period. See separate complete Limited Warranty document for a list of specific components. e.) What We Do Not Cover (Continued)- Removal or replacement costs. Shipping Costs. Damage to related components. Costs incurred due to downtime of vehicle.
Quantity: Sold as Kit
Note: Ignition timing control does not learn, and requires synchronizing distributor to engine with a timing light. |