Brodix BB-2X Aluminum Chev BB Head
The BB-2X head works well with a light car or large engine (509-555 cu in). It has a 340 intake port and flows over 360cfm with only the bowls blended and the intake ports matched to the gasket. These cylinder heads accept all standard pistons, intake manifolds, and rocker arms. The exhaust ports are raised .600" higher than stock. Valve cover rails are raised to assure no oil leakage. Assemblies include 2.300"/1.880" stainless steel valves, roller springs, 10 degree retainers and locks, rocker studs and guide plates.
Part Type: Cylinder Head
Application: Chevrolet Big Block
Cylinder Head Material: Aluminum
Bare or Assembled: Assembled
Combustion Chamber Size: 119cc
CNC Machined Combustion Chambers: No
Intake Valve Angle: 26
Exhaust Valve Angle: 26
Intake Port Volume: 340cc
CNC Machined Intake Port: No
Intake Port Flow: 363 cfm @ .700" Lift/ 28"
Intake Port Location: Standard
Intake Port Shape: Rectangular
Intake Port Dimensions:
Suggested Intake Gaskets: Fel-Pro 1252-3 or Equivalent
Exhaust Port Volume:
CNC Machined Exhaust Port: No
Exhaust Port Flow: 236 cfm @ .700" Lift/ 28"
Exhaust Port Location: Raised .600"
Exhaust Port Shape: D-Shaped
Exhaust Port Dimensions:
Suggested Exhaust Gaskets: Fel-Pro 1411 or Equivalent
Spark Plug Style:
Suggested Spark Plug: 14mm, .750 reach
Valve Guides: Yes
Valve Guide Spacing:
Valve Stem Diameter: 11/32" (.3415")
Valve Seats: Yes
Valve Job: 3-Angle
Intake Valve Diameter: 2.300"
Intake Valve Included: Yes
Exhaust Valve Diameter: 1.880"
Exhaust Valve Included: Yes
Suggested Valve Length:
Valve Spring Pockets: May be cut up to 1.625" MAX.
Valve Springs Included: Yes, 1.550" Dual
Valve Spring Application: Mechanical Roller, 240lbs. Seat, 550lbs. Open, .700" Max Lift
Valve Springs Retainers Included: Yes
Valve Locks Included: Yes (10 Degree)
Valve Seals Included: Yes
Rocker Studs Included: Yes (7/16")
Guide Plates Included: Yes
Valve Cover Mounting Style: Perimeter Bolt
Steam Holes Drilled: No
Heat Crossover: No
Suggested Head Bolts: ARP 135-3606
Suggested Head Studs: ARP 235-4502
Suggested Stud Girdle:
Head Bolt Torque with Oil: 70 ft./lbs.
Rocker Stud Torque with Oil: 45 ft./lbs.
Intake Bolt Torque with Oil:
Manufacturer: Brodix Cylinder Heads
Manufacturer's Part Number: BB-2 Plus
Weight:
Warranty: Race Application, No warranty expressed or implied
Quantity: Sold as Each |