Edelbrock Performer Series Carburetor, 600 cfm, Manual Choke
Edelbrock Performer Series Carburetors
Dependable street performance and smooth throttle response throughout the power band. Float levels are factory set, adjustments are rarely needed. Two-piece design means no gasket below the fuel level for leak free operation. Change jets, adjust floats and replace needle/seats without draining fuel or removing carb from manifold.
Part Type: Carburetor
Model: Performer Series
Application: Street Performance
Fuel Type: Gasoline
Number of Barrels: 4
Choke Type: Manual
Fuel Inlet: Single
Fuel Inlet Fitting Size: 5/8"-20 to 3/8" Hose
Secondary Type: Air Valve
Throttle Linkage Type: Universal
Ford Auto Trans Kickdown: No (Use EDE1483)
Main Body: Aluminum
Primary Venturii Diameter: 1-3/16"
Secondary Venturii Diameter: 1-9/16"
Base Plate: Integral with Main Body
Base Plate Pattern: 5.16" x 3.46"
Primary Throttle Bore Diameter: 1-7/16"
Secondary Throttle Bore Diameter: 1-11/16”
Fuel Bowls: Cast into Main Body
Externally Adjustable Floats: No
Fuel Bowl Sight Windows: No
Primary Main Jets: .100”
Secondary Main Jets: .095”
Metering Rods: .070” x .047”
Step-Up Spring: Orange (5" Hg)
Needle & Seat: .0935”
Float Height: 7/16”
Float Drop (± 1/4”): 1-1/4”
Pump Drive Link Location: Middle Hole
Accelerator Pump Nozzle Diameter: .028”
Vacuum Port - Timed (Spark): 1
Vacuum Port - Full Vacuum: 1
PCV Port: 1
Emissions: For use on Pre-Pollution Controlled Vehicles
Manufacturer's Part Number: 1405
Weight: 9.25 lbs.
Warranty: Limited 90-day material and workmanship
Quantity: Sold as Each
Note: Does not work with A.O.D. transmissions.